CADDX NX-6 Instrukcja Instalacji Pobierz pdf (Strona 48)

GE Security

24 2

INSTANT ZONE WITH CHIME ENABLED

A trip will create an alarm when the system is armed. When the control panel is

disarmed and the chime mode has been set, this zone will act as a chime zone.

25 2

FOLLOWER ZONE WITH CHIME ACTIVATED

This zone will be instant when the system is armed and no entry or exit delays are being

timed. It is delayed during entry and exit delay times. This zone will not bypass

automatically, even if enabled in segment 1 of location 23. When the control panel is

disarmed and the chime mode has been set, this zone will act as a chime zone.

26 2

24 HOUR, AUDIBLE, SUPERVISED, LOCAL

Creates an instant audible alarm, regardless of the arming state of the control panel. It

will display on the keypad (e.g. flashing zone LED’s, and changed READY LED). This

zonetype will NOT be reported.

27 2

INSTANT ZONE FORCE ARMABLE

This zone creates an instant alarm whenever the system is armed. This zone is force

armable (see feature definitions, pages 5-11).

28 2

INSTANT ZONE ACTIVITY MONITOR ENABLED

This zone creates an instant alarm whenever the system is armed. It will send a report if

the zone activity time is reached without a change of state (see location 40, segment 11

and locations 110-169).

INSTANT ZONE WITH END OF LINE RESISTOR DEFEAT

This zone creates an instant alarm whenever the system is armed. When the loop is

closed, the zone is ready. Opening of the loop means a faulted zone (see locations 110-

169).

30 2

24 HOUR, MEDICAL, AUDIBLE, SUPERVISED

Creates an instant audible alarm, regardless of the arming state of the control panel. It

will display on the keypad (e.g. flashing zone LED’s, and changed READY LED). A

medical report will be sent to the CMS.

Note: all zone configurations are programmed for double end of line resistor

configuration, except for DAY ZONE, FIRE, 24H AUDIBLE SUPERVISED and END

OF LINE RESISTOR DEFEAT.

NX-6-EUR Installation manual Page 48 23/12/04

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 103 104

Brak uwag

CADDX NX-6 Instrukcja Instalacji Strona 48