CADDX NX-6 Instrukcja Instalacji Pobierz pdf (Strona 71)

GE Security

LOCATION 124 - CONFIGURATION GROUP 8 ALARM EVENT CODE (1 segment, numerical data)

Location 124 contains the event code that is sent for a Contact ID or SIA report. The

desired event code should be chosen from the list on pages 121-122. The zone ID will be

the zone that is in alarm.

This location is not used for slow speed formats (like 4+2 and 3+1). This location may

also contain the alarm report code for the Robofon format (value 00-99).

LOCATION 125 - CONFIGURATION GROUP 8 CHARACTERISTIC SELECT (5 segments, feature

selection data)

Use the “Configuration Group Characteristic Selections” described in Location 111.

LOCATION 126 - CONFIGURATION GROUP 9 ALARM EVENT CODE (1 segment, numerical data)

Location 126 contains the event code that is sent for a Contact ID or SIA report. The

desired event code should be chosen from the list on pages 121-122. The zone ID will be

the zone that is in alarm.

This location is not used for slow speed formats (like 4+2 and 3+1). This location may

also contain the alarm report code for the Robofon format (value 00-99).

LOCATION 127 - CONFIGURATION GROUP 9 CHARACTERISTIC SELECT (5 segments, feature

selection data)

Use the “Configuration Group Characteristic Selections” described in Location 111.

LOCATION 128 - CONFIGURATION GROUP 10 ALARM EVENT CODE (1 segment, numerical data)

Location 128 contains the event code that is sent for a Contact ID or SIA report. The

desired event code should be chosen from the list on pages 121-122. The zone ID will be

the zone that is in alarm.

This location is not used for slow speed formats (like 4+2 and 3+1). This location may

also contain the alarm report code for the Robofon format (value 00-99).

LOCATION 129 - CONFIGURATION GROUP 10 CHARACTERISTIC SELECT (5 segments, feature

selection data)

Use the “Configuration Group Characteristic Selections” described in Location 111.

LOCATION 130 - CONFIGURATION GROUP 11 ALARM EVENT CODE (1 segment, numerical data)

Location 130 contains the event code that is sent for a Contact ID or SIA report. The

desired event code should be chosen from the list on pages 121-122. The zone ID will be

the zone that is in alarm.

This location is not used for slow speed formats (like 4+2 and 3+1). This location may

also contain the alarm report code for the Robofon format (value 00-99).

NX-6-EUR Installation manual Page 71 23/12/04

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 103 104

Brak uwag

CADDX NX-6 Instrukcja Instalacji Strona 71