CADDX NX-6 Instrukcja Instalacji Pobierz pdf (Strona 55)

GE Security

LOCATION 47 - AUXILIARY OUTPUT 1, EVENT AND TIME (2 segments, numerical data)

Segment 1 Use the chart below to select the event that will activate auxiliary

output 1 (relay 1)

Segment 2 Program the timing from 0-255 (minutes or seconds, depending on the

data programmed in segment 1, location 46). Programming a “0”

makes the output follow the event

LOCATION 48 - AUXILIARY OUTPUT 2, EVENT AND TIME (2 segments, numerical data)

Segment 1 Use the chart below to select the event that will activate auxiliary

output 2 (relay 2)

Segment 2 Program the timing from 0-255 (minutes or seconds, depending on the

data programmed in segment 2, location 46). Programming a “0”

makes the output follow the event

LOCATION 49- AUXILIARY OUTPUT 3, EVENT AND TIME (2 segments, numerical data)

Segment 1 Use the chart below to select the event that will activate auxiliary

output 3

Segment 2 Program the timing from 0-255 (minutes or seconds, depending on the

data programmed in segment 3, location 46). Programming a “0”

makes the output follow the event

LOCATION 50- AUXILIARY OUTPUT 4, EVENT AND TIME (2 segments, numerical data)

Segment 1 Use the chart below to select the event that will activate auxiliary

output 4

Segment 2 Program the timing from 0-255 (minutes or seconds, depending on the

data programmed in segment 4, location 46). Programming a “0”

makes the output follow the event

NX-6-EUR Installation manual Page 55 23/12/04

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 103 104

Brak uwag

CADDX NX-6 Instrukcja Instalacji Strona 55