CADDX NX-6 Instrukcja Instalacji Pobierz pdf (Strona 62)

GE Security

LOCATION 63 - KEYPAD AUXILIARY 1 COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (2

segments, numerical data)

Location 63 contains the tens and ones digits that will be sent for a 4+2 and 3+1 format if

the keypad “Auxiliary 1” (FIRE) is enabled in the partition feature selection. Segment 1

contains the tens digit; segment 2 contains the ones digit. For a 3+1 format, only the

segment 1 digit (tens) will be sent.

LOCATION 64 - KEYPAD AUXILIARY 2 COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (2

segments, numerical data)

Location 64 contains the tens and ones digits that will be sent for a 4+2 and 3+1 format if

the keypad “Auxiliary 2” (MEDICAL) is enabled in the partition feature selection. Segment

1 contains the tens digit; segment 2 contains the ones digit. For a 3+1 format, only the

segment 1 digit (tens) will be sent.

LOCATION 65 - KEYPAD PANIC COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (2

segments, numerical data)

Location 65 contains the tens and ones digits that will be sent for a 4+2 and 3+1 format if

the keypad “Panic” is enabled in the partition feature selection. Segment 1 contains the

tens digit, and segment 2 contains the ones digit. For a 3+1 format, only the segment 1

digit (tens) will be sent.

LOCATION 66 - KEYPAD MULTIPLE CODE ENTRY TAMPER COMMUNICATOR CODE, SLOW SPEED

FORMATS ONLY (2 segments, numerical data)

Location 66 contains the tens and ones digits that will be sent for a 4+2 and 3+1 format if

the keypad “Multiple Code Entry” (Tamper) is enabled in the partition feature selection.

Segment 1 contains the tens digit, and segment 2 contains the ones digit. For a 3+1

format, only the segment 1 digit (tens) will be sent.

LOCATION 67 - BOX TAMPER / BOX TAMPER RESTORE COMMUNICATOR CODE, SLOW SPEED

FORMATS ONLY (4 segments, numerical data)

Location 67 contains the tens and ones digits that will be sent for a 4+2 and 3+1 format if

the “Box Tamper” feature is enabled in location 37. Segment 1 contains the tens digit of

the “Box Tamper”. Segment 2 contains the ones digit of the “Box Tamper”. Segment 3

contains the tens digit of the “Box Tamper Restore”. Segment 4 contains the ones digit of

the “Box Tamper Restore”. For a 3+1 format, only the segment 1 resp. segment 3 digit

(tens) will be sent.

NX-6-EUR Installation manual Page 62 23/12/04

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 103 104

Brak uwag

CADDX NX-6 Instrukcja Instalacji Strona 62