CADDX NX-6 Instrukcja Instalacji Pobierz pdf (Strona 63)

GE Security

LOCATION 68 - AC FAIL / AC FAIL RESTORE COMMUNICATOR CODES, SLOW SPEED FORMATS

ONLY (4 segments, numerical data)

Location 68 contains the tens and ones digits for a 4+2 and 3+1 format that will be sent if

“AC Fail Reporting” is enabled. Segment 1 contains the tens digit of the “AC Fail

Reporting”. Segment 2 contains the ones digit of the “AC Fail Reporting”. Segment 3

contains the tens digit of the “AC Fail Restore”. Segment 4 contains the ones digit of the

“AC Fail Restore”. For a 3+1 format, only the segment 1 resp. segment 3 digit (tens) will

be sent.

LOCATION 69 - LOW BATTERY / LOW BATTERY RESTORE COMMUNICATOR CODES, SLOW SPEED

FORMATS ONLY (4 segments, numerical data)

Location 69 contains the tens and ones digits for a 4+2 and 3+1 format that will be sent if

“Low Battery Reporting” is enabled. Segment 1 contains the tens digit of the “Low Battery

Reporting”. Segment 2 contains the ones digit of the “Low Battery Reporting”. Segment 3

contains the tens digit of the “Low Battery Restore”. Segment 4 contains the ones digit of

the “Low Battery Restore”. For a 3+1 format, only the segment 1 digit resp. segment 3

digit (tens) will be sent.

LOCATION 70 - AUX POWER OVERCURRENT/ AUX POWER OVERCURRENT RESTORE

COMMUNICATOR CODES, SLOW SPEED FORMATS ONLY (4 segments, numerical data)

Location 70 contains the tens and ones digits for a 4+2 and 3+1 format that will be sent if

“Aux Power Overcurrent Reporting” is enabled. Segment 1 contains the tens digit of the

“Aux Power Overcurrent Reporting”. Segment 2 contains the ones digit of the “Aux Power

Overcurrent Reporting”. Segment 3 contains the tens digit of the “Aux Power Overcurrent

Restore”. Segment 4 contains the ones digit of the “Aux Power Overcurrent Restore”. For

a 3+1 format, only the segment 1 resp. segment 3 digit (tens) will be sent.

LOCATION 71 - BELL TAMPER AND BELL TAMPER RESTORE COMMUNICATOR CODES, SLOW

SPEED FORMATS ONLY (4 segments, numerical data)

Location 71 contains the tens and ones digits for a 4+2 and 3+1 format that will be sent if

siren supervision reporting is enabled. Segment 1 contains the tens digit of the “Bell

Tamper Reporting”. Segment 2 contains the ones digit of the “Bell Tamper Reporting”.

Segment 3 contains the tens digit of the “Bell Tamper Restore”. Segment 4 contains the

ones digit of the “Bell Tamper Restore”. For a 3+1 format, only the segment 1 resp.

segment 3 digit (tens) will be sent.

LOCATION 72 - TELEPHONE LINE CUT RESTORE COMMUNICATOR CODES, SLOW SPEED

FORMATS ONLY (4 segments, numerical data)

Location 72 contains the tens and ones digits for a 4+2 and 3+1 format that will be sent if

“Telephone Line Cut Restore Reporting” is enabled. Segment 1 and segment 2 are

reserved. Segment 3 contains the tens digit of the “Telephone Line Cut Restore”.

Segment 4 contains the ones digit of the “Telephone Line Cut Restore”.

For a 3+1 format, only the segment 3 digit (tens) will be sent.

NX-6-EUR Installation manual Page 63 23/12/04

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 103 104

Brak uwag

CADDX NX-6 Instrukcja Instalacji Strona 63