CADDX NX-6 Instrukcja Instalacji Pobierz pdf (Strona 49)

GE Security

) LOCATION 25 - ZONES 1-8 CONFIGURATION GROUP (8 segments, numerical data)

Location 25 contains the configuration group (zone type) for zones 1-8. Segment 1 is for

zone 1, and segment 8 is for zone 8. You will find the default configurations in the table

above.

LOCATION 26 - PARTITION SELECT, ZONES 1-8 (8 segments, feature selection data)

Location 26 is used to select the partition(s) in which zones 1 - 8 reside. A zone may

reside in any combination of the 2 partitions. If a burglary zone resides in more than 1

partition, that zone will only be active when all the partitions in which it is resident in are

armed. A zone that resides in more than 1 partition will be reported to its lowest partition

number. Location 26 has 8 segments. Segment 1 corresponds to zone 1, and segment 8

corresponds to zone 8.

Segment 1-8

1 = Partition 1

2 = Partition 2

3-8 Reserved

) LOCATION 27 - ZONES 9-16 CONFIGURATION GROUP (8 segments, numerical data)

Location 27 contains the configuration group (zone type) for zones 9 -16. Segment 1 is

for zone 9, and segment 8 is for zone 16. You will find the default configurations in the

table above.

LOCATION 28 - PARTITION SELECT, ZONES 9-16 (8 segments, feature selection data)

Location 28 is used to select the partition(s) in which zones 9-16 reside. A zone may

reside in any combination of the 2 partitions. If a burglary zone resides in more than 1

partition, that zone will only be active when all the partitions are armed. A zone that

resides in more than 1 partition will be reported to its lowest partition. Location 28 has 8

segments. Segment 1 corresponds to zone 9 and Segment 8 corresponds to zone 16.

Segment 1-8

1 = Partition 1

2 = Partition 2

3-8 Reserved

LOCATION 29-36 - RESERVED

NX-6-EUR Installation manual Page 49 23/12/04

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 103 104

Brak uwag

CADDX NX-6 Instrukcja Instalacji Strona 49