CADDX NX-6 Instrukcja Instalacji Pobierz pdf (Strona 64)

GE Security

LOCATION 73 - Reserved

LOCATION 74 - EXPANDER TROUBLE AND EXPANDER TROUBLE RESTORE COMMUNICATOR

CODES, SLOW SPEED FORMATS ONLY (4 segments, numerical data)

Location 74 contains the tens and ones digits for a 4+2 and 3+1 format that will be sent if

“Expander Trouble Reporting” is enabled. Segment 1 contains the tens digit of the

“Expander Trouble Reporting”. Segment 2 contains the ones digit of the “Expander

Trouble Reporting”. Segment 3 contains the tens digit of the “Expander Trouble Restore”.

Segment 4 contains the ones digit of the “Expander Trouble Restore”. For a 3+1 format,

only the segment 1 digit resp. segment 3 digit (tens) will be sent.

LOCATION 75 - FAIL TO COMMUNICATE COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (2

segments, numerical data)

Location 75 contains the tens and ones digits for a 4+2 and 3+1 format that will be sent if

the “Fail To Communicate Reporting” is enabled. Segment 1 contains the tens digit, and

segment 2 contains the ones digit. For a 3+1 format, only the segment 1 digit (tens) will

be sent.

LOCATION 76 - LOG FULL COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (2 segments,

numerical data)

Location 76 contains the tens and ones digits for a 4+2 and 3+1 format if the “Log Full

Reporting” is enabled. Segment 1 contains the tens digit, and segment 2 contains the

ones digit.

For a 3+1 format, only the segment 1 digit (tens) will be sent.

LOCATION 77 - OPENING COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (8 segments,

numerical data)

Location 77 contains the tens digit for a 4+2 and 3+1 format if “Opening Reporting” is

enabled. For a 4+2 format, the digit programmed in this section will be sent as the tens

digit of the alarm event code. As ones digit, the user number (1-F) will be reported (e.g.

code 16 = 1, code 40 = A). This location contains 8 segments. Any segment left as “0” will

follow the segment 1 selection. Segments 1-3 contain the opening code per bank of 15

codes. Segments 4-8 are reserved.

If you need to report openings and closings with a unique code per user, Contact ID or

SIA format must be used.

Segment 1

Codes 1-15, “Opening Code”

Segment 2

Codes 16-30, “Opening Code”

Segment 3

Codes 31-40, “Opening Code”

Segment 4-8

Reserved

NX-6-EUR Installation manual Page 64 23/12/04

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 103 104

Brak uwag

CADDX NX-6 Instrukcja Instalacji Strona 64